中空雙組份打膠機怎么進行清洗？
中空玻璃雙組份打膠機分為全自動雙組份打膠機和半自動雙組份打膠機,兩種設備的清洗辦法基本是一樣的.中空玻璃打膠機在使用完后,一定要進行清洗,假如不及時清洗雙組份膠就會固化在輸膠管和打膠機中,影響以后的正常使用.下面咱們一同看下清洗過程吧.
Insulating glass two-component gluing machine is divided into full-automatic two-component gluing machine and semi-automatic two-component gluing machine. The cleaning methods of the two equipment are basically the same The insulating glass gluing machine must be cleaned after use. If it is not cleaned in time, the two-component glue will solidify in the rubber conveying pipe and gluing machine, affecting the normal use in the future Let's take a look at the cleaning process
打膠機的清洗依據下次使用時間的間隔分為兩種清洗方式,一種是日常清洗主要是每班完畢后的清洗作業.還有一種是完全清洗,主要是設備準備要空置,在本次使用完下次使用間隔時間比較長.這兩種清洗的方式是不一樣的.
The cleaning of the glue applicator can be divided into two cleaning methods according to the interval of next use. One is daily cleaning, which is mainly the cleaning operation after each shift The other is complete cleaning, mainly because the equipment is ready to be vacant, and the interval between this use and the next use is relatively long The two cleaning methods are different
一個班完成后,封閉黑膠運送管和壓力開關,持續輸出白膠,直到放出的膠里沒有一點黑顏色,再封閉白膠壓力開關,封閉白膠運送開關,一個班的完工后清洗就完成了.
After the completion of a shift, close the black glue delivery pipe and pressure switch, and continue to output white glue until there is no black color in the released glue, then close the white glue pressure switch and close the white glue delivery switch, and the cleaning is completed after the completion of a shift
比較長期(15天以上)需要將雙組份打膠機設備空置:在生產任務完成后,將壓力開關和運送開關都封閉后,將膠槍拆卸下來用煤油清洗潔凈,將運送膠的管子拆卸下來,用空壓機的高壓空氣將管內的膠吹潔凈.
For a long time (more than 15 days), it is necessary to leave the two-component glue applicator equipment vacant: after the production task is completed, close the pressure switch and transport switch, disassemble the glue gun, clean it with kerosene, disassemble the pipe transporting glue, and blow the glue in the pipe with the high-pressure air of the air compressor
The above is the two-component gluing machine http://www.zkty.org.cn Thank you for checking the information of our company in your busy schedule. If you want to know more, you are welcome to inquire!
上一篇：打膠時中空玻璃起霧怎么辦？
下一篇：雙組份打膠機的安裝方式
