如何解決中空玻璃打膠機的磨損情況呢?
中空玻璃打膠機在實際使用的過程當中會多多少少的出現一些磨損的情況，關于這樣的一類磨損完全沒有辦法給它們進行分類，可以從整體的角度來講給他們進行歸納，比如可能對磨損有著一系列的表現，像是膠和磨損擦傷的磨損，另外一個就是根據摩擦的原理，分為粘著磨損，疲勞磨損以及腐蝕磨損等等。
In the actual use of insulating glass gluing machine, there will be more or less wear. There is no way to classify such kind of wear. We can summarize them from the overall perspective. For example, there may be a series of manifestations of wear, such as the wear of glue and abrasion, and the other is based on the principle of friction, It can be divided into adhesive wear, fatigue wear and corrosion wear.
如果是中空玻璃打膠機出現的粘著磨損，那么這樣的一種模式，他們本身就是在整個生產線工作的過程中切削力的作用下所表現出來的，整個摩擦表面的一些不同的吸附膜，會多多少少地遭到不同程度的破壞，讓他們表面的輪廓，在相互作用之下會發生一系列的冷焊，因?yàn)橄鄬\(yùn)動
If it is the adhesive wear of the insulating glass gluing machine, then such a mode is shown by the cutting force in the whole production line working process. Some different adsorption membranes on the friction surface will be more or less damaged to different degrees, so that the contour of their surface will have a series of cold under the interaction Welding, because of relative motion
。
因此，這樣的一種模式本身就會讓材料從一端走向另一端，而且，它會形成一種磨損，不過在這樣一個過程當中，有的時候材料也會附著在原本的表面，在這種情況之下會出現逆轉轉移的現象，或者是說整個表面會成為一種游離的顆粒，負載的越大，表面的溫度也是越高的，而且他們的形象也往往是越嚴重的。
Therefore, such a mode itself will make the material from one end to the other, and it will form a kind of wear, but in such a process, sometimes the material will adhere to the original surface, in this case, the reverse transfer phenomenon will occur, or the whole surface will become a kind of free particles, the greater the load, the surface temperature will also be The higher they are, the more serious their image is.
’通常來講，這樣的磨損會對運動咬符有一定的影響，整個運動往往是在磨損之間的一種表現形式，而且為了減輕原本的磨損，完全可以采取如下措施，比如，可以合理的去選擇一些不同的材料，相對于金屬的一些材料來講，他們更加容易粘著的，而且的材料相對于塑形的材料來說，他就有著的抗粘著的能力，他們都可以用這些不同的材料來進行表面性的處理
’Generally speaking, such wear will have a certain impact on the movement bite. The whole movement is often a form of expression between the wear and tear. In order to reduce the original wear, the following measures can be taken. For example, we can reasonably choose some different materials. Compared with some materials of metal, they are easier to adhere and the latest materials Compared with the molding material, it has a strong anti adhesion ability, they can use these different materials to carry out surface treatment
在實際處理的過程當中，也可以通過電動或者是噴涂的方式對他們進行的處理，除此之外，他們也可以對所有的摩擦問題的表面進行一定的溫度控制，采用一些不同的潤滑劑來進行添加，而且，具有著的控制壓力。
In the actual treatment process, they can also be comprehensively treated by electric or spraying. In addition, they can also control the surface temperature of all friction problems, use some different lubricants to add, and have super strong control pressure.
如果中空玻璃打膠機表面產生一些疲勞磨損的話，那么在整個應變能力接觸的情況之下，往往就會有其他的一些磨損的強度，在摩擦的表面多多少少的都會有一定的深度，而且它有著疲勞的裂紋，隨著整個裂紋之間的相互連接，金屬微粒往往會從表面開始有所脫落，甚整個表面會出現一些麻點的情況，為了提高表面的疲勞壽命，一定要合理利用。
If there is some fatigue wear on the surface of the insulating glass gluing machine, then in the case of contact with the whole strain capacity, there will be some other wear strength. The friction surface will have a certain depth more or less, and it has fatigue cracks. With the interconnection of the whole cracks, metal particles will often fall off from the surface In order to improve the fatigue life of the surface, it must be used reasonably.
上一篇：怎么處理自動點膠機焊接不良的問題
下一篇：打膠機點膠針筒應怎樣清洗？
