蜜桃av噜噜一区二区三区-蜜桃av麻豆av果冻传媒-蜜桃av亚洲精品一区二区-蜜桃bt天堂精品视频在线观看-蜜桃成人无码区免费视频网站-蜜桃福利视频

The two-component gluing machine is divided into automatic two-component gluing machine and semi-automatic two-component gluing machine. The cleaning methods of the two kinds of equipment are basically the same. After application, it must be cleaned. If the two-component glue is not cleaned in time, it will condense in the hose and glue machine, which will affect the normal use in the future.

雙組份打膠機的清潔依據下一次涂覆時刻的距離分為兩種清潔辦法。 一個是日常清潔主要是每個班次完畢后的清潔操作。 還需求進行完全的清潔，這主要是因為設備預備空著，而且這次運用與下次運用之間的距離比較長。 兩種清潔辦法不同。

According to the distance of the next coating time, the cleaning of the two-component dispenser can be divided into two cleaning methods. One is that the daily cleaning is mainly the cleaning operation after each shift. It also requires complete cleaning, mainly because the equipment is empty, and the distance between this application and the next application is relatively long. The two cleaning methods are different.

完結后，封閉黑色橡膠輸送管和壓力開關，繼續輸出白色膠，直到開釋的膠中沒有黑色停止，然后封閉白色橡膠壓力開關，封閉白色橡膠輸送開關，清潔完結 完結后。

After the completion, close the black rubber conveying pipe and pressure switch, continue to output the white rubber until there is no black stop in the released rubber, then close the white rubber pressure switch, close the white rubber conveying switch, and after the completion of cleaning.

長時刻(超過15天)需求閑置設備：完結生產任務后，封閉雙組份打膠機的壓力開關和輸出開關，取下并清洗膠槍 用火油清潔膠管，然后用空壓機中的高壓空氣拆解并吹干管中的膠。

Long time (more than 15 days) idle equipment is required: after the completion of the production task, close the pressure switch and output switch of the two-component dispenser, remove and clean the hose with hot oil for the glue gun, and then use the high-pressure air in the air compressor to disassemble and dry the glue in the hose.

以上就是雙組份打膠機為大家介紹的如何清洗？更多的詳細內容   歡迎來官網咨詢客服。

The above is a two-component dispenser for you to introduce how to clean? For more details, please come to the official website for consultation and customer service.