打膠機的調試工作應該怎么做?
將打膠機放在平坦清潔的地方，打開電源和供氣，打開電源并開始工作。
Place the dispenser in a flat and clean place, turn on the power and air supply, turn on the power and start working.
1.打開打膠機氣泵開關，主電源開關和控制臺開關。按下控制臺上的手動按鈕，在顯示屏上找到原點設置，單擊輔助原點設置，然后單擊頭部原點設置。
1. Turn on the air pump switch, main power switch and console switch of the dispenser. Press the manual button on the console, find the origin setting on the display, click auxiliary origin setting, and then click head origin setting.
2.打膠機設置后，返回到玻璃厚度設置。是玻璃厚度，然后是鋁墊片，然后是玻璃厚度。請注意，只要指令位置與當前位置值匹配，傳送帶上就不會有玻璃。
2. After the gluer is set, return to the glass thickness setting. First, the thickness of the glass, then the aluminum gasket, then the thickness of the glass. Note that there will be no glass on the conveyor as long as the command position matches the current position value.
3.混合后，按桶膠上的按鈕，按按鈕選擇工作，開始按按鈕膠，按按鈕進行切割。此時，膠頭將膠合并按下按鈕進行剪切如果看不見白色膠，則在按下鏈接生產線時它將自動運行，但是此時膠將被自動剪切你。
3. After mixing, press the button on the first bucket of glue, press the button to select work, start to press the button glue, and press the button to cut. At this time, the glue head will combine the glue and press the button to cut. If the white glue cannot be seen, it will automatically run when the linked production line is pressed, but at this time, the glue will automatically cut you.
打膠機是現代工業中一種新型的自動噴涂設備，可以在各種尺寸和形狀的產品上噴涂粘合劑。點膠機的主要性能包括可調整的噴涂膠形狀，可調整的噴涂膠尺寸，可調整的反向抽吸膠量，不同的噴涂膠粘度，噴涂室清潔有一個方便的要求。主要用于皮革制品，手袋，箱包，玩具，包裝等行業。
Gluer is a new type of automatic spraying equipment in modern industry, which can spray adhesive on products of various sizes and shapes. The main performance of dispensing machine includes adjustable spray glue shape, adjustable spray glue size, adjustable reverse suction glue amount, different spray glue viscosity, and a convenient requirement for cleaning the spray room. Mainly used in leather products, handbags, bags, toys, packaging and other industries.
以上內容由打膠機小編整理，本文觀點不代表本站觀點。
The above content is compiled by the gluing machine, this point of view does not represent the point of view of this site.
上一篇：中空玻璃打膠機氣動和馬達哪個好？
下一篇：灌膠機的膠管應該如何更換?
