中空玻璃產品的問題和原因！
今年夏天，各種項目陸續開工，中空玻璃的訂單也在增加，一些企業也開始計劃擴大規模，增加工廠的生產能力，購買一些機械設備來代替手工操作。今天我們來了解一下中空玻璃產品的問題和原因
In the summer of this year, various projects have been started, orders for hollow glass are increasing, and some enterprises are planning to expand the scale, increase the production capacity of the factory, and purchase some mechanical equipment to replace manual operation. Today, let's understand the problems and causes of insulating glass products
1. 中空玻璃里面有霧
1. There is fog in the insulating glass
原因l:由于兩種密封劑質量不穩定，低分子物質含量高，在太陽紫外線照射下，密封劑在中空玻璃內遷移揮發，形成霧;
Cause 1: due to the unstable quality of the two sealants and the high content of low molecular matter, the sealants migrate and volatilize in the hollow glass under the sun ultraviolet irradiation, forming fog;
原因二:封條破裂;原因3:丁基膠處理4個關節不好;原因4:干燥劑質量差，在陽光照射下，釋放低分子量物質，造成霧氣。
The second reason is that the seal is broken; the third reason is that four joints are not well treated with butyl rubber; the fourth reason is that the quality of the desiccant is poor, and low molecular weight substances are released under the sunlight, causing fog.
2. 中空玻璃冷凝
2. Condensation of insulating glass
原因l:分子篩質量不穩定，吸附能力低;
Reason 1: the mass of molecular sieve is unstable and the adsorption capacity is low;
原因二:一、二章失效;
Reason 2: Chapter 1 and Chapter 2 are invalid;
原因3:這四個連接處理不當。
Cause 3: the four connections are improperly handled.
另外，如果中空玻璃自爆是鋼化玻璃大面積自爆，那就是鋼化玻璃的質量問題。還建議玻璃盡量磨邊，以應力，減少玻璃爆裂。
In addition, if the self explosion of hollow glass is a large area self explosion of toughened glass, it is the quality problem of toughened glass. It is also suggested that the glass should be polished as much as possible to eliminate the stress and reduce the glass bursting.
上一篇：雙組份打膠機混膠棒的清洗方法！
下一篇：高速點膠機的產品特點以及使用方法！
